Mining

Dash D3 Configuration and Set up

1. Specifications of the Antminer D3 are as follows:
a) Hash rate: 15 GH/s (Variation of ±5% is expected)
b) Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp).
c) Dimensions of the miner: 320*130*190mm
d) Hashing algorithm: X11

2. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.

3. Bitmain recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3.

Read More

How to set up SimpleMining (3)

MOS is easiest to use Mining Operating System.
You only need to download, flash it, set your email and boot it !
After that all can be done from Mining Dashboard on simplemining.net ! Any Drive (HDD,SSD or Pendrive) that can be erased GPU Radeon AMD R9 200/300 / RX400 / RX500 (Curently Vega doesnt work) or NVIDIA DHCP (auto ip assigning) – i dont support wifi

Read More

Mining Rig Upgrade

We will upgrade our 5th rig, from 4 video cards to 9 video cards, on the first version we had to return 5 video cards due to low Hash rate. We will overclock and adjust the power for each card, it will be running SimpleMining OS! The description has the list of all the items that you need to build this awesome mining rig!

Read More

Building a GPU mining Rig PART 2 (HARDWARE)

    How to build a GPU mining Rig PART 2 (HARDWARE) How to build a gpu mining rig PART 1 (frame) 📢 https://youtu.be/r9tcbn5EJRc 👈   JIURUN 6-Pack PCIE Riser VER 007 PCI Riser 6 PIN 1x to x16 Powered Riser Adapter Card w/ 60cm USB 3.0 Extension Cable & PCI-E to SATA Power Cable…

Read More